Siemens TM SIWAREX WP351 HF User Manual

Data and command errors Error code
[errorCode]
Add info
[errorAd‐
dInfo]
Description
9192 Coarse dribbling is not plausible
9183 Filter depth material flow is too high
9182 Minimum material flow is negative
7063 Parameter error DR 24 7063 Additional information indicates an implausible parameter in DR 24
Parame‐
ter ID
Parameter ID of the affected parameter in DR 24
7064 Parameter error DR 25 7064 Additional information indicates an implausible parameter in DR 25
Parame‐
ter ID
Parameter ID of the affected parameter in DR 25
9507 Dosing active
7067 Parameter error DR 28 7067 Additional information indicates an implausible parameter in DR 28
Parame‐
ter ID
Parameter ID of the affected parameter in DR 28
7068 Additional information indicates an implausible parameter in DR29
7072 Parameter error DR 45 7072 Additional information indicates an implausible parameter in DR 45
Parame‐
ter ID
Parameter ID of the affected parameter in DR 45
7075 Additional information indicates an implausible parameter in DR10
9.4.4 Add info [errorAddInfo] for DR03
Additional information is available for most data/command errors. The cause of the error is
described in detail with this information. If a data/command error bit is set, the additional
information is also filled accordingly. Thus, the error bits and the additional information must be
evaluated together in the program to identify the exact cause of the error.
If additional information not listed above appears for a data/operating error bit, it is a parameter
ID. This defines the exact parameter that caused the error.
The following table presents the association between the parameter and parameter ID.
Table 9-3 Add info [errorAddInfo] for DR03
Parameter Add info [errorAddInfo]
Scale name header 301
Scale name 302
Weight unit 303
Restriction code 304
Number of weighing ranges 305
Minimum weight weighing range 1 306
Maximum weight weighing range 1 307
Interrupts/diagnostic messages
9.4 Operating errors
Technology module TM SIWAREX WP351 HF
Operating Instructions, 01/2020, A5E47521010-AA 137

Siemens TM SIWAREX WP351 HF Specifications

General

Brand	Siemens
Model	TM SIWAREX WP351 HF
Category	Control Unit
Language	English