Siemens TM SIWAREX WP351 HF User Manual

Parameter Add info [errorAddInfo]
Minimum weight weighing range 2 308
Maximum weight weighing range 2 309
Minimum weight weighing range 3 310
Maximum weight weighing range 3 311
Calibration weight 0 312
Calibration weight 1 313
Calibration weight 2 314
Calibration weight 3 315
Calibration weight 4 316
Calibration digits 0 (measured) 317
Calibration digits 1 (measured) 318
Calibration digits 2 (measured) 319
Calibration digits 3 (measured) 320
Calibration digits 4 (measured) 321
Scale interval weighing range 1 322
Scale interval weighing range 2 323
Scale interval weighing range 3 324
Scale parameters 325
Initial zero-setting 326
Initial zero-setting if tared 327
Automatic zero tracking device 328
Tare device 329
Weight simulation 330
Multi range / multi interval scale 331
Automatic zero-setting device 332
Automatic zero tracking in dosing cycle 334
Weighing range data in SecureDisplay 336
Gross indicator 337
Switch between AGFI / DTI Mode A 339
Maximum tare weight (% of max.) 359
Initial zero-setting device limit negative (% of max.) 362
Initial zero-setting device limit positive (% of max.) 363
Semi-automatic zero-setting device limit negative (% of max.) 364
Semi-automatic zero-setting device limit positive (% of max.) 365
Stability weight 1 366
Stability time 1 (s) 367
Maximum waiting time for stability 1 (s) 368
Delay time before stability 1 (s) 369
Stability weight 2 370
Stability time 2 (s) 371
Maximum waiting time for stability 2 (s) 372
Delay time before stability 2 (s) 373
Filter 1 period (s) 374
Interrupts/diagnostic messages
9.4 Operating errors
Technology module TM SIWAREX WP351 HF
138 Operating Instructions, 01/2020, A5E47521010-AA

Siemens TM SIWAREX WP351 HF Specifications

General

Brand	Siemens
Model	TM SIWAREX WP351 HF
Category	Control Unit
Language	English