Procedure in case of loss of user data
1. Press the â‘ pushbutton at the upper left in the enclosure for at least 3 seconds.
⇒ LED ② lights up yellow.
2. Enter the IP address of the electronic weighing system in the Mozilla Firefox or
Google Chrome browser within 2 minutes. (Default: 192.168.0.21)
3. Log on as follows:
Logon name: admin
Password: admin
See also
Commissioning the electronic weighing system with TIA Portal (Page 38)
6.3.2 Reading/writing data records
Introduction
Every data record (DR) can only be fully read from the electronic weighing system in the web
server or written to the electronic weighing system. Transfer of a single parameter within a data
record is not possible.
Parameter assignment/addressing
6.3 Web server
Technology module TM SIWAREX WP351 HF
Operating Instructions, 01/2020, A5E47521010-AA 51
To Next Page
Loading...
Need help?
General
