Siko AG06 - General Information; Documentation; Block Diagram

General Information
AG06 Date: 07.02.2018 Art. No. 85674 Mod. status 055/18 Page 6 of 114
1 General Information
This user manual is valid with firmware version PC 2.04 or higher!
1.1 Documentation
The following documents are associated with this document:
 The data sheet describes the technical data, the dimensions, the pin assignment, the
accessories and the order key.
 The installation instructions describe the mechanical and electrical installation with all
safety-relevant conditions and the associated technical specifications.
 The User manual for actuator commissioning and integration into a fieldbus system.
You can also download these documents at http://www.siko-global.com/p/ag06.
2 Block Diagram
Fig. 1: Block diagram
Inverse-
polarity
protection
Mains
adapter
Control
Output stage
Motor
Encoder
Gear
Bus electronics
+UB
control
CAN
+UB
output
stage
Inverse-
polarity
protection
Verpol-
schutz
Battery