Simex multicon cmc-99 - Page 289

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
–
LOG_START_DATE
– date of log start,
–
LOG_END_DATE
– date of log end. If there is a “
NULL
” in place of date, it means
that particular file is not closed (logging is not finished),
ID GROUP_NO DIR LOG_START_DATE LOG_END_DATE
Fig. 8.36. main_log_bin_logs file view example
File
main_log.bin_event_log
– reserved for future usage,
File
main_log.bin_dev_settings
– reserved for future usage,
File
main_log.bin_cons_dev_info
- -info about the device, contains:
–
dev_type
– type of the device,
–
serial_no
– serial number of the device,
–
s_version
– software version,
–
h_version
– reserved,
–
db_version
– reserved,
File
log.db_group_settings
– settings of registered group,
1) number of a group,
2) displayed name,
3) logging start date,
4) logging end date,
5) log description,
6) basic logging period,
7) alternative logging period,
8) logging mode (1 – always on, 2 – triggered),
9) number of logged channels (1 to 6),
10) name of a file containing a detailed logging configuration,
11) logical channel number used for basic logging triggering, or -1 if not selected,
12) logical channel number used for alternative logging triggering, or -1 if not selected,
289