Sindoh M401 - Installation

Installation
Installing Conditions
Environments
The printer must be installed at following places.
 Good ventilation and flat surface
 No obstacles within 8cm from printer’s right side for cooling fan to operate properly
 No direct sunlight exposure and dustless and clean place
 No direct cold or warm air blown from air conditioner or heater
 Printer operating temperature: 15.6°C ~ 32.2°C (shipping and storage: -40.0°C ~ 60.0°C)
Installation
Unpacking and Checking Components
Unpacking
1. Take the printer and all components from the box.
2. Remove tapes in and on the printer.
3. Check the printer and included components.
Included components
No
Item No.
Item
Qty.
Remarks
1
-
Basic Tray
1
250
sheets
2
MM1A0556
AC power cord
1
110V
3
L0025703
USB cable
1
4
M0124133(M402/M403)
Quick installation manual
1
5
M0124112(M401)
M0124132(M402,M403)
Driver
CD & User Manual
1
6.
M0124123
Paperport Utility CD
1