Sindoh M401 - Magnification; To Adjust Magnification; Print Skew Page

1. Select PRT Registration from Diagnosis Mode.
2. Select Margin Adjust.
3. Select a value to change from Left Margin and Top Margin
4. Press the arrow keys to set desired value and press Select key.
Print margin range is like the followings and can be changed with unit of 1.
Categories
Values
Top Margin
-25 ~ +25
Left Margin
-25 ~ +25
5. To exit, press Return.
Select Print Skew Page from the menu to print on the letter or A4 paper.
Magnification
To adjust magnification:
1. Select REGISTRATION from Diagnosis Mode.
2. Select Magnification.
3. Select a value from either Vertical or Horizontal.
4. Press the arrow keys to set desired value and press Select key.
Magnification ranges that can be configured are as the following.
Descriptions
Values
Vertical Magnification
-5 ~ 5 (default: 0)
Horizontal Magnification
-5 ~ 5 (default: 0)
5. To exit, press Return.
Print Skew Page
Print the Skew Test Page that can check the changes after changing margins or magnification. When
each configuration was changed, select this menu to check the changed results.