Sindoh M401 - Service Error Code(5 xx)

failure
1. Check the harness between system card and driving
motor unit
2. If the problem is not solved, replace the driving motor unit
330
Fan motor lock
failure
It occurs when fan motor does not reach target speed within the
configured time
1. Check the harness between system card and fan unit
2. If the problem is not solved, replace the fan unit
340
Option Tray Lost
link Error
It occurs when there’s a communication problem between option
tray
1. Check the harness between system card and option tray
2. If the problem is not solved, replace the option tray board
390
Engine Software
Error
It occurs when a problem that cannot be recovered from engine
software
1. Check the problem reoccurrence after POR
2. If the problem reappears, replace the system card
Service Error Code(5xx)
Errors
Descriptions
Actions
501
OPL Parsing Error
It occurs when a problem occurs during OPL parsing (sentence
analyzing)
1. Check if correct printer driver is installed
2. Check if recommended USB cable is being used
3. Replace the system card
502
PJL Parsing Error
It occurs when a problem occurs during PJL parsing
1. Check if correct printer driver is installed
2. Check if recommended USB cable is being used
3. Replace the system card
503
Software Error
Module 1
Software Error Module 1
1. Check reoccurrence after POR
2. Replace the system card
504
Software Error
Module 1
Software Error Module 2
1. Check reoccurrence after POR
2. Replace the system card
505
Software Error
Module 1
Software Error Module 3
1. Check reoccurrence after POR
2. Replace the system card
506
Software Error
Module 1
Software Error Module 4
1. Check reoccurrence after POR
2. Replace the system card
507
Software Error
Module 1
Software Error Module 5
1. Check reoccurrence after POR
2. Replace the system card