Sindoh M401 - Service Error Code(2 xx); Service Error Code(4 xx)

Service Error Code(2xx)
Errors
Descriptions
Actions
201
Insufficient Memory
It occurs when allocated memory is insufficient
1. Check reoccurrence after POR
2. Replace the system card
202
Memory Full
It occurs when memory is full
1. Check reoccurrence after POR
2. Replace the system card
211
Defective Flash
It occurs when flash drive cannot be recognized
1. Check reoccurrence after POR
2. Replace the system card
212
Too Many Bad Block
It occurs when there are too many bad blocks in flash partition
1. Check reoccurrence after POR
2. Replace the system card
213
Flash Full
It occurs when flash is full
1. Format the flash
2. Close some stand-by tasks
221
Boot Argument Read
Failure
It occurs when necessary arguments when booting
1. Check reoccurrence after POR
2. Replace the system card
251
USB Device Open
Failure
It occurs when USB device cannot be used
1. Check reoccurrence after POR
2. Replace the system card
Service Error Code(4xx)
Errors
Descriptions
Actions
401
Insufficient Memory
It occurs when allocated memory is insufficient
3. Check reoccurrence after POR
4. Replace the system card
402
Memory Full
It occurs when memory is full
3. Check reoccurrence after POR
4. Replace the system card
411
Defective Flash
It occurs when flash drive cannot be recognized
3. Check reoccurrence after POR
4. Replace the system card
412
Too Many Bad Block
It occurs when there are too many bad blocks in flash partition
3. Check reoccurrence after POR
4. Replace the system card
413
Flash Full
It occurs when flash is full