Counter
This function is used as to check Fax Counter value.
1. Select Fax Test from diagnosis mode.
2. Select Counter.
3. Use arrow keys to select a menu to test and press Select key. The categories that can be checked
from Counter are the followings.
i. Tx Total No
ii. Rx Total No
Error Log
Display Log
Error log offers the printer’s error history. Up to recent 12 printer errors are displayed. The recent error is
displayed first and oldest is displayed on the bottom. When the log is full and an error occurs, the oldest
error gets deleted.
Each error is displayed with 0XXXXX and 1XXXXX and when the first digit is 0, it is a fatal error (SC) that
cannot be solved by general user and 1 is a recoverable error that can be recovered with user’s operation.
Additionally, if there are no stored errors, 000000 is displayed.
To view error log:
1. Select Display Log from Error Log menu.
Error log displays 4 errors in three times as the figure. To move to next screen, press Continue.
For example,
To Next Page
Loading...
