11. System configuration
Pump settings => Pump settings =>Temperature Control => External Sensor
Step Key Display Description
7.2
With transducer:
• Press <down arrow key>
) The following settings are available:
o Input
o Minimal Value
o Maximal Value
• Press <Select control key>
• Use < down/up arrow key> to enter the value
• Press <Save control key>
• Press <Back control key>
With normally closed or normally open contacts:
• Press <down arrow key>
• Press <Select control key>
• Use <down/up arrow key> to enter the value
• Press <Save control key>
• Press <Back control key>
Exter. Sensor Setting
Sensor Type
[normally closed]
Input
[0.00 ] AI
To Next Page
Loading...
