9 - Operation and use
74
Press and then to display all parameters contained in the menu.
1 - Sealing bar temperature B1
Allows you to configure the temperature of the B1 side sealing bar. You are advised to set the
minimum temperature required for good sealing. This parameter determines the sealing time.
2 - Sealing bar temperature B2
Allows you to configure the temperature of the B2 side sealing bar. You are advised to set the
minimum temperature required for good sealing. This parameter determines the sealing time.
Fig. 9.13.3
Fig. 9.13.4
(value from +50°C to 250°C)
recommended value: 190°C
Esc
Menu
SEALING BAR
FORMAT PARAMETERS
PACK
FILM ADJUSTMENT
SEALING BAR
B1 SEALING BAR
TEMPERATURE
[°C]
Esc
Mod
190
To Next Page
Loading...
