Sonoscape S30 - Versions of System Settings and Probe Table; System Settings; System Settings Export

94 Service Manual
7 Settings Import/Export
7.1 Versions of System Settings and Probe Table
Press the Menu key to enter the System Settings menu, select System Information to view versions
of system settings and probe table on the System Information screen.
Lincense Valid Days: No expire
Software Build On 2012/09/12
Probe table Version 2
User setting Version 2
Control Number: 101106
Software Version: 0.0.0.9v
Kernel Version: 2
RTC Rev: 1.7
ACM Rev: 1.5
TTG Rev: 1.0
FIFO Rev: 1.0
DBF Rev: 0.8
DBF BID Rev: 1.b
HV BID Rev: 1.2
EC Rev: 3.0
ECG Rev: 0.0
EXIT
7.2 System Settings
The system settings file is in a format of userdataX.X.X.X-oo.tar.gz, X.X.X.X stands for the current
software version, oo stands for the system settings version. X.X.X.X is only for reference, but oo
must be consistent with the system settings version. Otherwise, the system settings could not be
imported.
7.2.1 System Settings Export
You can back up system settings, including general settings, printer settings, customized obstetrics
and measurement settings, to the USB drive.
Perform the steps as follows,
1. Connect the USB drive to the ultrasound system.
2. Choose Menu -> System Settings -> Load Default -> Retrieve to display the following menu.