SpectraLink IP-DECT SERVER 6500 - Page 114

14215700-IG, Edition 15.0
May 2020, Original document
114
6. SIP registration - configure the settings for the IP-PBX (Configuration > SIP). Remember to
reboot the server.
For more information, see "Configuring SIP and IP-PBX Settings" on page136.
7. Register/create users and enter values for user name, authentication user and authentication
password (depending on PBX type).
For more information, see "Handset Management" on page219.
8. Subscribe handset.
For more information, see "Registering Users and Subscribing Spectralink DECT Handsets"
on page211.
Note:
The above mentioned configuration steps are only the minimum steps for configuring a
system and being able to make calls between two handsets.
Depending on your solution, configuration of media resources, sites, redundancy server,
handset sharing, phone book, MSF messaging and handset can also be part of further
configuration.
For more information, see:
l "Configuring Media Resource Settings" on page168
l "Configuring Sites (and Zones)" on page175
l "Configuring Redundancy" on page286
l "Configuration of Handset Sharing" on page315
l "Configuring Company Phone Book/Directory " on page305
l "Messaging Over MSF" on page276
l "Managing Handset Configuration and Configuration Groups" on page227
Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide