SpectraLink IP-DECT SERVER 6500 - Adding Handset Sharing License; Configuration of Handset Sharing

14215700-IG, Edition 15.0
May 2020, Original document
315
Adding Handset Sharing License
To enable handset sharing it is necessary to add a Handset Sharing License to the Spectralink IP-
DECT/Virtual IP-DECT Server.
For more information about ordering and loading license into the server, see "Ordering Licenses" on
page61 and "Loading Licenses" on page62.
Note:
When a Handset Sharing License is loaded and the Spectralink IP-DECT/Virtual IP-
DECT Server is rebooted, the web based Administration Page will display users dif-
ferently than without a Handset Sharing License.
The Users menu will have a List Users submenu and a List Devices submenu. The
List users’ submenu is for SIP user data and the List devices submenu is for device
data.
Furthermore, the DECT access code which is used for securing DECT subscriptions is
handled differently depending on whether a Handset Sharing License is present or not.
l Without handset sharing the DECT access code is part of the data for a specific
user.
l With handset sharing the DECT access code is not a part of the data for a specific
user, it is a part of the data for a specific device.
If a user specific DECT access code is configured before installing the Handset Sharing
License, the DECT access code will be used as device DECT access code and as (initial)
user pin code.
Both can, however, be changed independently of each other, if a license is present.
Configuration of Handset Sharing
Configuration of handset sharing consists of the following tasks to be completed:
l Configuration of user sign-in/sign-out
For more information, see "User Sign-in/Sign-out" on the next page.
l Adding Devices to Server
For more information, see "Adding Devices to Server" on page329.
l Adding Users to Servers
For more information, see "Adding Users to Server" on page332.
l Handset Sharing and Provisioning
For more information, see "Handset Sharing and Provisioning" on page333.
Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide