14215700-IG, Edition 15.0
May 2020, Original document
124
Configuring Network Settings
Through the web based Administration Page of the server, you can configure the network for the
Spectralink IP-DECT/Virtual IP-DECT Server components using a static IP address or a dynamic IP
address (DHCP). For more information, see "Recommended Network Configuration" on page116.
Note:
As the Spectralink IP-DECT/Virtual IP-DECT Server is a critical part of the SIP infra-
structure, it is highly recommended that you do not use DHCP.
Using a static IP address for the Spectralink IP-DECT/Virtual IP-DECT Server is the pre-
ferred method. If the device is configured using a static IP address, it is possible to assign
options to the DHCP server making it extremely easy to configure all base stations.
It is also possible to configure Simple Network Management Protocol (SNMP).
Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide
To Next Page
Loading...
