Field Setting
Packet Capture - Filters
Capture SIP (Optional) If enabled, SIP signalling is captured.
Capture external RTP
(Optional)
If enabled, all voice packages from other endpoints are cap-
tured.
Capture internal RTP (Optional) If enabled, voice data between base stations is captured.
Capture MSF (Optional) If enabled, MSF signalling is captured.
Capture everything (Optional) If enabled, any kind of traffic is captured.
Custom filter (Optional) Enter a custom filter in PCAP filter format to capture traffic.
Decrypt SIP over TLS
(Optional)
If enabled, a decrypted version of SIP signalling sent over TLS
is captured.
Log TLS keys (Optional) If enabled, TLS master secrets are logged to a log file for later
decryption of TLS in packet capture.
Packet Capture - Status
Status Shows the status of the capture progress.
Current capture size Shows current capture size in kbytes.
Field
Network Diagnose
Host Enter the relevant IP address or domain name.
Click Ping to send a ping request to the host to check if net-
work is connected.
Click Trace route if you want to trace the route to the host.
To Next Page
Loading...
