SpectraLink IP-DECT SERVER 6500 - To Get Phone Book Data through LDAP Server, CSV File or Broadworks

14215700-IG, Edition 15.0
May 2020, Original document
306
To Get Phone Book Data through LDAP Server, CSV
File or BroadWorks
Configure the server to retrieve phone book data using LDAP server (or secure LDAP server), by
importing phone book data from a CSV file or retrieve phone book data from BroadWorks.
1. Click Administration, and then click Phonebook.
2. On the Phonebook Configuration page, enter the following data:
Field Setting
Phonebook Configuration - Disabled
Disabled As default, phone book configuration is disabled.
You can configure the server to retrieve phone book data
using LDAP server or by import of phone book data from
a CSV file.
Phonebook Configuration - Imported CSV file
Imported CSV file Enable this if you want to import phone book data from
CSV file.
Import Browse for the CSV file to import.
Note: The CSV file must contain correct format. For
more information, see "Example of CSV File Format" on
page311.
Encoding Select the correct encoding for the CSV file. You can
choose between UTF-8, ISO/IEC 8859-1 or Windows-
1252.
Note: The encoding depends on the software that was
used to generate the CSV file. If you use Microsoft Win-
dows, you will probably select Windows-1252.
Number fields Enter the indexes of the columns containing dialable num-
bers.
Phonebook Configuration - LDAP
Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide