Field Setting
User - DECT device
Product name After registration of user and subscription of handset, this field
will contain information about the handset product name.
E.g. Spectralink 7532
Model number After registration of user and subscription of handset, this field
will contain information about the handset's technical model
number. E.g. 7532
Software part number After registration of user and subscription of handset, this field
will contain information about the software part number.
E.g. 14225100
Firmware After registration of user and subscription of handset, this field
will contain information about the firmware version.
E.g. PCS 19K
IPEI (Optional) If a specific handset is being subscribed for this user, enter the
IPEI number of the actual handset (the IPEI number is readable
from the label on the product). If this is not the case, this field
can be left empty and it will auto-fill when the handsets sub-
scribe.
Note: A SIP REGISTER will not be sent before there is an IPEI
number present.
Note: Programming of IPEI number into the system database
is necessary to enable service to the handset.
Note: If handset sharing is used, the IPEI label will be a link,
that you can click on and link to a device. For more information,
see "Adding Devices to Server" on page329.
Access code (Optional) Administrators can define a system wide or individual access
code as extra wireless security during the subscription process.
Note: Some 3rd party phones may need an Access code to
register to the Spectralink IP-DECT/Virtual IP-DECT Server.
Configuration group (Optional) If using handset configuration, enter the Group ID of the Con-
figuration Group. For more information, see "Managing Hand-
set Configuration and Configuration Groups" on page227.
To Next Page
Loading...
