SpectraLink IP-DECT SERVER 6500 - Configuration - Provisioning

14215700-IG, Edition 15.0
May 2020, Original document
396
Field Setting
Redundancy Configuration - Settings
Failover time(sec) Enter value for failover time.
Failure time is the time in seconds from the Spectralink IP-
DECT/Virtual IP-DECT Server detects a failure, until it initiates
a failover operation and cause the other peer to take over.
Default value: 15 sec
For more information about failure time, see "Failover time con-
ditions" on page304.
Configuration - Provisioning
Field Setting
Provisioning Configuration - Server
Method The Spectralink IP-DECT/Virtual IP-DECT Server must
know the protocol and address of server containing the firm-
ware and configuration.
The Spectralink IP-DECT/Virtual IP-DECT Server can use
the following methods to obtain the provisioning server URL:
l Disabled (The Spectralink IP-DECT/Virtual IP-DECT
Server will not use provisioning)
l Static (The administrator must manually specify the
URL of the provisioning server)
l DHCP (Option 66)
Select the relevant method for obtaining the URL of the pro-
visioning server.
Default value: DHCP
Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide