14215700-IG, Edition 15.0
May 2020, Original document
243
To Update Spectralink IP-DECT/Virtual IP-DECT Server Firmware
1. Click Firmware, and then click Wireless Server.
2. On the Update firmware page, click Browse to find the relevant firmware file.
Note:
The Spectralink IP-DECT Servers support doing firmware updates directly from a
firmware file and also from firmware files contained in a ZIP file. Zip file firmware
update is only supported on systems running firmware PCS 20B_ or newer. On
the Spectralink Virtual IP-DECT Server One, it is required to use a ZIP file con-
taining both the Spectralink Virtual IP-DECT Server One firmware (.ova file) and
the Spectralink IP-DECT Server firmware (.bin file) in order to use the firmware as
default for base stations and media resources.
Enable the Use firmware as default check box if you want the server firmware as default for
all base stations and media resources (recommended).
Click Update.
Wait until the system has finished updating.
Caution:
Do not cut power.
3. Click Reboot now or Back. Clicking Back, you have the option to make further changes
before the update is started.
Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide
To Next Page
Loading...
