14215700-IG, Edition 15.0
May 2020, Original document
268
Resetting System to Factory Settings
Through the web based Administration Page of the Spectralink IP-DECT/Virtual IP-DECT Server it
is possible to reset the Spectralink IP-DECT/Virtual IP-DECT Server to factory default settings (ori-
ginal configurations and empty user data base). Firmware version is not affected.
Note:
You can also reset the Spectralink IP-DECT Server and Spectralink DECTMedia
Resource to factory settings by pressing the Reset button. For more information, see
"Spectralink IP-DECT Server 6500 and Media Resource Reset Button" on page80.
To Reset System
1. Click Configuration, and then click Factory Reset.
2. Click Reset, and then click OK.
All configuration and user data are being erased and the system will reboot.
Note:
Information regarding Spectralink IP-DECT Server:
If you by mistake delete a license or perform a factory reset of the system (which will
delete all loaded licenses), it is possible to retrieve the license(s) again by entering the
ARI code of the server in the Spectralink License Key Generator on Spectralink Cor-
poration's support portal: http://support.spectralink.com/keycode.
l In the ARI (DECT) / Serial number (Wi-Fi) field, enter the ARI, and click
Submit.
l Copy the license(s) into the web based Administration Page (Administration >
License > Licenses > Load license) and click Load.
If the license does not appear when entering the ARI of the system, contact Tech-
nicalsupport@spectralink.com.
Information regarding Spectralink Virtual IP-DECT Server:
If you by mistake delete a license or perform a factory reset of the system (which will
delete all loaded licenses), you must contact Spectralink Order Management via (EMEA
and APAC) emeaom@spectralink.com or (NALA) nalaom@spectralink.com and
provide Server ID (UUID) information of the server.
When receiving the license from Spectralink Order Management:
l Copy the license(s) into the web based Administration Page (Administration >
License > Licenses > Load license) and click Load.
Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide
To Next Page
Loading...
