14215700-IG, Edition 15.0
May 2020, Original document
28
Description - Spectralink DECT Repeater
The Spectralink DECT Repeater is a building block to be used to extend the coverage area in a wire-
less Spectralink DECT solution. The repeater does not increase the number of traffic channels, how-
ever, it provides a larger physical spreading of the traffic channels and thereby increases the
coverage area established with the Spectralink IP-DECT/Digital DECT Base Stations/Spectralink
IP-DECT Servers 200/400.
Note:
Both the Spectralink IP-DECT Server 200 and Spectralink IP-DECT Server 400 are
Spectralink IP-DECT Servers with a built-in Spectralink IP-DECT Base Station.
The repeaters are mainly used in areas with limited traffic. The Spectralink DECT Repeater is avail-
able with either 2 or 4 traffic channels. It is wireless and does not need physical connection to the
Spectralink IP-DECT/Virtual IP-DECT Server, making it very easy to install. The repeaters can be
supplied with an external antenna making it possible to create radio coverage in a remote area
without cabling to the rest of the installation.
The base station/server 200/400 can support up to 3 repeaters.
Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide
To Next Page
Loading...
