14215700-IG, Edition 15.0
May 2020, Original document
125
To Configure a Dynamic IP address
It is recommended to use a dynamic IP address (DHCP) for base stations.
To configure network settings (dynamic IP address) for the base stations from the web based Admin-
istration Page:
1. Click Configuration, and then click General.
2. On the General Configuration page, enter the following data:
Field Setting
General Configuration - Pv4
Method Select DHCP assigned.
Note: Selecting DHCP, all other network settings are provided auto-
matically.
3. Click Save.
Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide
To Next Page
Loading...
