14215700-IG, Edition 15.0
May 2020, Original document
258
Statistics
On this page you can get an over all overview of how the system is running. Statistics require a sig-
nificant number of episodes (calls, handover, abnormal releases etc.) to give valid ratios. The per-
formance of the installation depends on both deployment (how well it is deployed) and building
(construction, materials etc.).
You can get statistics of the following:
l Wireless Server
l Media Resource
l Base Station
l Device
l Active Calls
l Abnormal Releases
l Traffic Distribution
Note:
Looking at all the different statistics and correlating information from the various statistic
menus, you will begin to find patterns that could point in the direction of a given problem,
e.g.:
If a user reports problems in a meeting room, start by looking under Abnormal release.
You will most likely find the user in question listed multiple times or a specific RFP num-
ber listed multiple times. Now take a look under Base Station. If the problem happens to
occur during peak hours and you also have lots of Times busy incidents, this means that
there is lack of speech capacity in the area where the base station is located.
Note:
For more in depth information and to gain access to the Spectralink training material, you
must attend training and become Spectralink Certified Specialist.
Please visit http://partneraccess.spectralink.com/training/classroom-training for more
information and registration.
Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide
To Next Page
Loading...
