SpectraLink IP-DECT SERVER 6500 - Approvals and Environment

14215700-IG, Edition 15.0
May 2020, Original document
20
Description - Spectralink IP-DECT Server 6500
The Spectralink IP-DECT Server 6500 controls the wireless infrastructure. It manages Spectralink
DECTMedia Resources, Spectralink IP-DECT Base Stations and the IP interface to the call hand-
ler.
The communication protocol between the Spectralink IP-DECT Server 6500 and the call handler is
a SIP line interface.
A Spectralink IP-DECT Server 6500 is installed directly on the LAN and must be managed as part of
the corporate network.
The Spectralink IP-DECT Server 6500 is a multi cell solution in a 19” cabinet. It is shipped from the
factory as an Spectralink IP-DECT Server 6500 with one Ethernet port and 32 on-board traffic chan-
nels, which allows for up to 32 full duplex simultaneous media streams (RTP streams) depending on
the codec being used. There is no radio part in the Spectralink IP-DECT Server 6500. This means
that at least one Spectralink IP-DECT Base Station must be part of the Spectralink IP-DECT Server
6500 solution.
Note:
The Spectralink IP-DECT Server 6500 is extremely scalable and is very easy to scale in
order to meet customer demands. If it is upgraded to its full potential via licenses, it sup-
ports up to 4096 registered handsets, up to 1024 Spectralink IP-DECT Base Stations
and with a maximum of 32 Spectralink DECTMedia Resources, it supports up to 1024
simultaneous calls. For more information, see "Licenses for Spectralink IP-DECT Server
400/6500" on page49.
Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide