EasyManua.ls Logo

SpectraLink IP-DECT SERVER 6500 - Network and Provisioning

SpectraLink IP-DECT SERVER 6500
456 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14215700-IG, Edition 15.0
May 2020, Original document
19
Description - Spectralink IP-DECT Server 400
The Spectralink IP-DECT Server 400 is in its basic edition a single cell system (one built-in base sta-
tion in the server) supporting SIP lines only.
The Spectralink IP-DECT Server 400 is designed with connector for External Antenna.
Additional Spectralink IP-DECT Base Stations can be added to the Spectralink IP-DECT Server
400 to enable multicell functionality and to expand the covered area.
Note:
A license is required to enable the multicell function. For more information, see "Licenses
for Spectralink IP-DECT Server 400/6500" on page49.
All Spectralink IP-DECT Base Station models can be used. Up to 9 additional Spectralink IP-DECT
Base Stations can be added to the Spectralink IP-DECT Server 400 system and up to 3 additional
Spectralink DECT Repeaters can be added to each Spectralink IP-DECT Base Station.This results
in up to 30 Spectralink DECT Repeaters if all Spectralink IP-DECT Base Stations are registered.
The Spectralink IP-DECT Server 400 without any licenses supports up to 12 registered handsets
and 6 simultaneous calls.
The DECT radius of coverage is up to 600 meters/2000 feet with a handset in free sight.
Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide

Table of Contents

Other manuals for SpectraLink IP-DECT SERVER 6500

Related product manuals