SpectraLink IP-DECT SERVER 6500 - Checking Sync State of Spectralink IP-DECT Base Station

14215700-IG, Edition 15.0
May 2020, Original document
206
Checking Sync State of Spectralink IP-DECT Base Sta-
tion
You can get information about the synchronization state (sync. state) of the base station - the uptime
and to which radio unit it synchronizes on through the web based Administration Page of the Spec-
tralink IP-DECT/Virtual IP-DECT Server. This is useful when you want to get an overview of the
base stations and in case of problem solving.
1. Click Administration, and then click Base Station.
2. On the Base Stations page, check the sync. state of the base stations:
l
If marked with : Free running (Sync Master)
l
If marked with green: Synchronized (Primary Sync Master)
l
If marked with : Searching (not in sync with any radio unit)
l
If marked with : Unknown (not connected - base station removed from installation)
3. View RFP and RPN numbers.
Note:
When you click a base station in the list, you can check the RSSI values of the base sta-
tions it is synchronizing on (Primary sync/Secondary (Alternative) sync). For more inform-
ation about synchronization and RSSI values, see Synchronization and Deployment
Guide.
Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide