Field Setting
Primary Server (Optional) Enter the IP address of the Primary DNS server.
Secondary Server (Optional) Enter the IP address of the Secondary DNS server.
General Configuration - NTP (Network Time Protocol)
Server (Optional) Enter the IP address of the NTP server from which the
system will obtain the current time.
Timezone (Optional) Select the wanted time zone. The time zones include day-
light saving times.
Posix timezone string (Optional) Customized time zone setting. The string must be in
POSIX time zone format.
General Configuration - UPnP
Enabled (Optional) Enabled by default. If enabled, the device is UPnP dis-
coverable.
UPnP is an acronym for Universal Plug and Play. If the
IP address of the device is unknown (e.g. forgotten or
DHCP-assigned), UPnP can be used to easily identify
the IP address of the device.
Note: If My Network Places in Windows is setup to
show icons for networked UPnP devices, every Spec-
tralink IP-DECT/Virtual IP-DECT Server, Media
resource and Base station will be present in My Network
Places.
Broadcast announcements
(Optional)
Specifies if UPnP announcements are broadcasted.
If enabled, the device broadcasts announcements auto-
matically.
General Configuration - Remote syslog
Host (Optional) Enter the host or IP address of the remote syslog server.
If specified, messages will be sent to the server.
Port Server port used for remote syslog.
Default value: 514
Facility Remote syslog facilities used for log messages.
Default value: Local 0
Refer to RFC5424.
To Next Page
Loading...
