14215700-IG, Edition 15.0
May 2020, Original document
159
Following options are available:
Paging
Method
Traffic Load
Max. BHCA *
Sites
Local Media
Resource
Other Limitations
1) Default 1000 incoming
calls
Optional Optional *** Max. 256 base stations
2) Mult-
icast
1000 incoming
calls
Optional Optional *** WAN/LAN Connections
3) Site
based
1000 incoming
calls per site
Mandatory Optional Max. 256 base stations per phys-
ical separated site
4) Zone
based **
(incl. Site
based)
1000 incoming
calls per zone
Mandatory Optional No use of repeaters
(bearer handover)
* BHCA = Busy Hour Call Attempts
** Zone based paging is built on the DECT Standard for Location Area Level (LAL).
*** Local Media Resources require use of sites.
Note:
If having more than 256 base stations connected on a system, default paging is not
enough due to the increased traffic load and higher density of base stations.
Note:
It is recommended to use zone based paging on sites with heavy voice/messaging load.
Note:
The base stations installed on the different sites must not have any overlap with base sta-
tions from other sites - therefore, the physical distance between locations is important. If
overlap cannot be avoided, then it is necessary to use zone based paging.
Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide
To Next Page
Loading...
