Field Setting
Strict password requirements
(Optional)
If enabling strict password requirements, the device can
be configured to enforce certain security rules and naming
conventions. For more information, see "Changing Admin-
istration Password" on the previous page.
Note: Once enabled, this setting can only be disabled by a
factory reset (Configuration > Factory Reset) that will
remove all configuration and user data.
Password expiration (Optional) Select when you want the password to expire.
Possible values: Never, 30 days or 90 days.
Default value: Never
Note: Once enabled, this setting can only be disabled by a
factory reset (Configuration > Factory Reset) that will
remove all configuration and user data.
Security Configuration - Data protection
Allow unencrypted HTTP
(Optional)
HTTPS is forced by default.
If enabled, HTTP support is supported instead of HTTPS.
Note: Enabling unencrypted HTTP can cause passwords
and other sensitive data to be transmitted in clear text on
the network.
Enable legacy TLS (Optional) If enabled, TLS versions 1.0 and 1.1, certificates signed
with the SHA-1 algorithm and CBC based ciphers are sup-
ported.
Note: Enabling legacy TLS is required for security and
interoperability with some older browsers and call hand-
ing platforms.
Allow remote logging
(Optional)
If enabled, remote logging is allowed.
Remote logging allows for Spectralink debug tools to
extract debug information from the unit.
To Next Page
Loading...
