Field Setting
Phonebook Configuration - BroadWorks
BroadWorks Enable this if you want to configure the server to retrieve
phone book data using BroadWorks.
It is possible to select a combination of five BroadWorks
phone books/directories on the Spectralink IP-DECT/Vir-
tual IP-DECT Server:
l Enterprise Directory
l Enterprise Common
l Group Directory
l Group Common
l Personal Directory
The BroadWorks phone books/directories are retrieved
each time the user enter the phone book from the hand-
set.
The difference between Enterprise Directory/Group Dir-
ectory and the Enterprise Common/Group Common is,
that the Directory contains a list of contacts in the enter-
prise/group, whereas the Common is a list of commonly
used contacts that are not in the enterprise/group.
Each retrieved phonebook/directory entry consists of the
following data:
l Name - corresponding to the BroadWorks' "name" ele-
ment or a concatenation of "firstname" and "last-
name".
l Department - corresponding to the BroadWorks'
"department" element.
l Number - corresponding to the BroadWorks' element
with the following priority: 1: "number", 2: "phone", 3:
"extension".
l Mobile - corresponding to the BroadWorks' "mobile"
element.
URI * Enter the relevant URI of the BroadWorks server.
E.g.: https://example.org
Enterprise Directory Default value: Enabled
Enterprise Common Default value: Enabled
Group Directory Default value: Enabled
To Next Page
Loading...
