Field
Early encryption and re-keying
(Optional)
If enabled, this enables encryption immediately after
connection establishment and regular re-keying until
connection termination.
Possible values: Disabled, Enabled or Required.
Default value: Disabled
Note: Enabling early encryption may increase con-
nectivity problems in areas with poor coverage.
Note: Only Spectralink Handsets with firmware PCS
18Da or newer support Required.
Note: This feature is part of DECT Security Step A.
System access code (Optional) System wide DECT access code.
The access code is from 0 - 8 decimal digits.
Note: Individual user access code (AC) has pre-
cedence over system access code.
Send date and time (Optional) If enabled, date and time will be sent to the handsets
when a call is terminated.
Default value: Enabled
System TX power (Optional) Used for controlling (reducing) the output power of all
connected base stations supporting power control.
Unless set to default, this will override any base station
specific power setting.
Default value: Default (250 mW)
Note: It is possible to define a TX power value for a
specific base station (Administration > Base Sta-
tion).
To Next Page
Loading...
