EasyManua.ls Logo

SpectraLink IP-DECT SERVER 6500 - Page 349

SpectraLink IP-DECT SERVER 6500
456 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14215700-IG, Edition 15.0
May 2020, Original document
349
DECT RADIO APPROVAL
l EN 301 406
ENVIRONMENTAL CONDITIONS
l Operating temperature: 10 - 40º C (50 - 104º F)
l Storage temperature: -50 - 70º C (-58 - 158º F)
l Relative humidity: between 20% and 80% (non-condensing)
l Compliance with the requirements of EU directive 2015/863/EU (ROHS) and 2012/19/EU
(WEEE)
ELECTRICAL REQUIREMENTS
l Power over Ethernet (IEEE 802.3af), mode A & B
l PoE Class 1 device
l Typical power consumption: 3 W per unit
l External power outlet (power supply must be ordered separately)
l External antenna connection (Only Spectralink External Antenna can be used)
PHYSICAL CHARACTERISTICS
l Size: 100 x 100 x 43 mm (3.94 x 3.94 x 1.69 in.)
l Weight: 120 gr. (4.2 oz)
l Black (Pantone Black)
l Wall-mountable, indoor
l Can be mounted upside down
INTEROPERABILITY
l For information about supported Call Control/Unified Communications (UC) (PBX and IP-
PBX) platforms, visit http://support.spectralink.com/.
Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide

Table of Contents

Other manuals for SpectraLink IP-DECT SERVER 6500

Related product manuals