Field
Enable MSF (Optional) If enabled, access to the MSF application interface is sup-
ported.
Default value: Disabled
Enable XML-RPC (Optional) If enabled, access to the XML-RPC application interface is
supported.
Default value: Disabled
Internal messaging (Optional) If enabled, internal messaging to allow handset-to-hand-
set messaging without an external application is suported.
Enable FAS connectivity (Optional)
(System dependant and only relevant
if using ATEX handset)
If enabled, connectivity to FAS is supported.
Default value: Disabled
ATEX handset GAP enrollment type
(Optional) (Only relevant if using
ATEX handset)
If enabled, GAP as enrollment type is used instead of
DOIP enrollment type.
Default value: Disabled
Wireless Server Configuration - Feature codes
Enable (Optional) If enabled, feature codes for controlling features from the
handsets can be used.
Call forward unconditional - enable
(Optional)
Enable call forward unconditional by dialing this code
(*21*), followed by the desired extension ($= extension)
and #.
E.g.: *21*$#
Note: It is possible to change the code *21* on the Spec-
tralink IP-DECT/Virtual IP-DECT Server to fit your stand-
ard. For more information, see the relevant
documentation available at
http://support.spectralink.com/.
Call forward unconditional - disable
(Optional)
Disable call forward unconditional by dialing this code
(#21#).
Wireless Server Configuration - Languages
Phone Language (Optional) Language of system messages displayed in handset.
Select the desired language from the list.
Wireless Server Configuration - MSF
Enable Long-Press Key0 - Phone-
book (Optional)
If enabled, allow Spectralink IP-DECT/Virtual IP-DECT
Server to use this long key press for company phone
book.
To Next Page
Loading...
