EasyManua.ls Logo

SpectraLink IP-DECT SERVER 6500 - Page 394

SpectraLink IP-DECT SERVER 6500
456 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14215700-IG, Edition 15.0
May 2020, Original document
394
Field Setting
Include MKI in SDES offers
(Optional)
Handles the RFC 4568 SRTP Master Key Index Parameter
in SDP offers.
Default value: Disabled
Note: If not running PCS 20A_ or newer, this field is only vis-
ible if a Security (TLS, SRTP) License is loaded.
Enable ICE (Optional) If enabled, support for Interactive Connectivity Establishment
(ICE) (RFC 5245) is allowed.
Enable TURN (Optional) If enabled, support for Traversal Using Relays around NAT
(TURN) (RFC 5766) is allowed.
TURN server (Optional) Enter TURN server address.
TURN username (Optional) Enter TURN server username.
If left blank, the per-user authentication username will be
used.
TURN password (Optional) Enter TURN pass word.
If left blank, the per-user authentication password will be
used.
SIP Configuration - Call status
Play on-hold tone (Optional) If enabled, on-hold tone is received in remote end when
placed on hold.
Note: This might conflict with Music-on-Hold.
Provide Music-on-Hold (Optional) If enabled, Music-on-Hold is played for the remote end.
Display status messages
(Optional)
If enabled, call status messages are received in the handset.
'#' key ends overlap dialing
(Optional)
If enabled, pressing the # key dials number in overlap dialing.
Call waiting (Optional) If enabled, call waiting is supported.
Allow automatic offhook If enabled, automatic offhook is allowed for intercom fea-
tures.
Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide

Table of Contents

Other manuals for SpectraLink IP-DECT SERVER 6500

Related product manuals