Field Setting
Provisioning Configuration - Handset configuration (Only relevant to Spectralink IP-DECT
Servers and Spectralink Virtual IP-DECT Server One)
Import Enable.
If enabled, this will make automatic update possible if a .ver
file and handset configuration files are available.
Provisioning Configuration - Firmware
Wireless Server (Only relevant to
Spectralink IP-DECT Server 200)
Enter name of firmware image file. Must match file name on
provisioning server.
Leave empty for no firmware download.
Wireless Server (Only relevant to
Spectralink IP-DECT Server
400/6500 and Spectralink Virtual
IP-DECT Server One)
Enter name of firmware image file. Must match file name on
provisioning server.
Leave empty for no firmware download.
Enable the Use firmware as default check box if you want
the server firmware as default for all base stations and media
resources (recommended).
Handset - Butterfly Enter name of firmware image file (-Over-the-Air.bin). Must
match file name on provisioning server.
Leave empty for no firmware download.
Handset - 75x2, 76x2 and 77x2
series
Enter name of firmware image file (-Over-the-Air.bin). Must
match file name on provisioning server.
Leave empty for no firmware download.
Handset - 72x2 series Enter name of firmware image file (-Over-the-Air.bin). Must
match file name on provisioning server.
Leave empty for no firmware download.
Handset - OEM Enter name of firmware image file. Must match file name on
provisioning server.
Leave empty for no firmware download.
To Next Page
Loading...
