Field Setting
Phonebook Configuration - BroadWorks
BroadWorks Enable this if you want to configure the server to retrieve phone
book data using BroadWorks.
It is possible to select a combination of five BroadWorks phone
books/directories on the Spectralink IP-DECT/Virtual IP-DECT
Server:
l Enterprise Directory
l Enterprise Common
l Group Directory
l Group Common
l Personal Directory
The BroadWorks phone books/directories are retrieved each
time the user enter the phone book from the handset.
The difference between Enterprise Directory/Group Directory
and the Enterprise Common/Group Common is, that the Dir-
ectory contains a list of contacts in the enterprise/group,
whereas the Common is a list of commonly used contacts that
are not in the enterprise/group.
Each retrieved phonebook/directory entry consists of the fol-
lowing data:
l Name - corresponding to the BroadWorks' "name" ele-
ment or a concatenation of "firstname" and "lastname".
l Department - corresponding to the BroadWorks'
"department" element.
l Number - corresponding to the BroadWorks' element
with the following priority: 1: "number", 2: "phone", 3:
"extension".
l Mobile - corresponding to the BroadWorks' "mobile" ele-
ment.
URI * Enter the relevant URI of the BroadWorks server.
E.g.: https://example.org
Enterprise Directory Default value: Enabled
Enterprise Common Default value: Enabled
Group Directory Default value: Enabled
Group Common Default value: Enabled
Personal Directory Default value: Enabled
To Next Page
Loading...
