Spectralink IP-DECT Server 6500 and Media Resource Reset Button 80
Resetting or Restarting the Spectralink IP-DECT Server and Spectralink
DECTMedia Resource 80
Mounting in aRack 80
Adding Additional Spectralink DECTMedia Resources 81
How to Add a Spectralink DECTMedia Resource 82
Deploying Spectralink Virtual IP-DECT Server One and Spec-
tralink Virtual IP-DECT Media Resource on VMware ESXi 85
Deploying a Spectralink Virtual IP-DECT Server (or Spectralink Virtual IP-
DECT Media Resource) 86
Installing Spectralink IP-DECT Base Station 90
Power Requirements for the Base Station 90
Base Station Appearance and Components 91
Base Station LED Indicators 93
Front Cover 93
LAN Port on Face Plate 93
Base Station Reset Button 93
Mounting the Base Station 94
Wall Mounted (Vertical) Installation RF Coverage 94
Measurements and Mounting Template 96
Installing Spectralink DECT Repeater 98
Repeater Appearance and Components 99
Repeater LED Indicators 100
Front Cover 100
Site Installation Considerations 100
Environmental Considerations 100
How to Wall Mount the Repeater 101
Measurements and Mounting Template 102
Programming a Spectralink DECT Repeater with the Repeater Pro-
gramming Kit 103
Content of the Spectralink Repeater Programming Kit 103
Set up of the Hardware for Repeater Programming 104
Programming the Spectralink DECT Repeater with the Handset and Repeater
Management Tool 104
Numbering of Base Stations/Server 200/400 and Repeaters in a Normal Con-
figuration 105
Numbering of Repeaters in a Repeater Daisy Chain Configuration 106
Using the Spectralink DECT Repeater With ExternalAntenna 107
Alternative Synchronization Ways 108
Using Spectralink IP-DECT Server 200/400 and Spectralink
IP-DECT Base Station With ExternalAntenna 109
How to Connect External Antenna to Device 112
Configuration Steps Overview 113
14215700-IG, Edition 15.0
May 2020, Original document