Spectroquant Pharo 300 - Page 100

Operation Spectroquant
®
Pharo 300
100
ba75703d07 04/2014
5 If necessary, enter intervals for up
to 4 timers.
6 If necessary, enter the AQA2 tar-
get value and AQA2 tolerance.
7 If necessary, select from how
many single measurements the
documented measured value is
calculated.
8 If necessary, set whether a
reagent blank value is required.
9 If necessary, set whether a user
calibration is possible and/or
required.
10 Complete the programming of the
method with [Complete].
The method is programmed and
selected for measuring.
Edit method
16.04.07 9:52
Timer 0 00:00:00
Timer 1 00:00:00
Timer 2 00:00:00
Timer 3 00:00:00
AQA2 target value 1.00 mg/l
AQA2 tolerance 0.10 mg/l
Required measurements 1
Blank required No
Calibration possible No
Calibration required No
Back Complete