EasyManua.ls Logo

Spectroquant Pharo 300 - Page 404

Default Icon
456 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Check the pH of the
sample, specified range
:
pH 5 10.
If required, add dilute
sodium hydroxide
solution or sulfuric acid
drop by drop to adjust
the pH.
Pipette 5.0 ml of the
sample into a reaction
cell, do not mix!
Reaction time:
10 minutes
Place the cell into the
cell compartment. Align
the mark on the cell with
that on the photometer.
102552
Cell Test
Surfactants (anionic)
Shake the cell vigor-
ously for 30 seconds.
Measuring 0.05 2.00 mg/l MBAS*
range: *Methylene-blue-active substances
Expression of results also possible in mmol/l.
Add 2 drops of T-1K,
close the cell with the
screw cap.
Quality assurance:
To check the measurement system (test reagents,
measurement device, and handling) a surf
actants
standard solution must be prepared from dodecane-1-
sulfonic acid sodium salt GR, Cat.No. 112146 (see section
“Standard solutions”).
Swirl the cell before
the measurement.
Release 06/2014 - Spectroquant
®
UV/VIS Spectrophotometer Pharo 300

Table of Contents