EasyManua.ls Logo

Spectroquant Pharo 300 - Page 405

Default Icon
456 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Check the pH of the
sample, specified range
:
pH 3 8.
If required, add dilute
sodium hydroxide
solution or sulfuric acid
drop by drop to adjust
the pH.
Pipette 5.0 ml of the
sample into a reaction
cell, do not mix!
Add 0.50 ml of T-1K with
pipette and close with
the screw cap.
Reaction time:
5 minutes
Place the cell into the
cell compartment. Align
the mark on the cell with
that on the photometer.
101764
Cell Test
Surfactants (cationic)
Measuring 0.05 1.50 mg/l surfactants (cationic)
range: (calculated as N-cetyl-N,N,N-trimethylammonium bromide)
Swirl the cell for
30 seconds.
Quality assurance:
To check the measurement system (test reagents,
measurement device, and handling) a surf
actants
standard solution must be prepared from N-cetyl-N,N,N-
trimethylammonium bromide, Cat.No. 102342 (see section
“Standard solutions”).
Release 06/2014 - Spectroquant
®
UV/VIS Spectrophotometer Pharo 300

Table of Contents