USER MANUAL « ASP 116 EVOLUTION »
Sprinte SAS, All rights reserved, including translation rights
2.3 MyLift, application for smartphone.
“MyLift” application is a software for android-based devices designed to the lift’s owners and intended
to help them customize their lift this application gives access only to all of the user’s settings of the lift (voice
synthesizer, music, displays, access codes, date & time, etc...). Changes made with this application are taken
instantly in account by the controller, no need to reset it.
This application needs the second 230SP board, to give a separate bluetooth access from the first 230SP.
MyLift is available on
Google PlayStore
Every editable settings with Mylift , are identified
throughout this document by the logo of the application:
2.4 SETUP MENU
Protection of settings modification, selection of display language on the digital
console, date and time adjustment
Control panel series type, consulting software version, number of expansion
boards
Machinery temperature adjustment detection
Name of client, address of lift, serial number, lift number in multiplex
Hoist mechanism : Hydraulic systems, drive systems
Automatic evacuation of passengers in case of main power failure.
Configuration of the inverter connected in CANbus with the 216SP controller
Levelling of the car with the doors opened
Number of levels, car stop level,..
type of operation, car light timer, car priority timer, car priority key
Configuration of stricken floors, type of fire operation
Voice synthesis configuration
Configuration of type of displays landings and car with configuration of display
at each level. Type of arrow on landing and in car
Type of doors, nudging, timers, CPC, SHOCK, opening/closing button, electro
cam, pre-opening.
Type of reader, recalibration, close levels, crossed flags
Settings for the overspeed monitor
phone alarm configuration
Settings for the energy savings mode of the lift.
Input-output settings for electronic boards of the controller
To Next Page
Loading...
