Sprinte ASP 116 evolution - Emergency Telephones; Energy Savings

USER MANUAL « ASP 116 EVOLUTION »
CONFIGURATION
Sprinte SAS, All rights reserved, including translation rights
52
2.24 Emergency telephones
CONFIGURATION ► EMERGENCY PHONE
ALARM FILTER
Filtering alarm call in car
Output DIS-CB6 / 211SP
[NO] [YES]
2.25 Energy savings
CONFIGURATION ► ENERGY SAVINGS
STOP&GO MODE
This mode reduces the consumption of the inverter while the Lift is stopped
in user mode.
Before enabling this function, be sure your cabinet is equipped with KSG
contactor. This mode is activated once the lift is stopped for 20 minutes. Then,
“STOP & GO” is displayed on Controller. The « STOP&GO » can be tested in the
menu ASSISTANCE ► INVERTER FREQ ► STOP&GO ACTIVATE
[NO] [YES]
DISPLAY STANDBY
This mode reduces the consumption of 232SP, 235SP displays on floors
and in the car. The backlight of the screens is switched off.
[NO] [YES]
STANDBY TIMER
Timer value before activating the DISPLAY STANDBY
[0…20] min