The hoistway access detection sets the lift out of order(“HOISTWAY ACCESS” fault,
see 4.4.11), in the case a landing door has been detected opened for longer than 8
seconds (thanks to the landing doors safety locking contact), out of a normal car
parking in user mode. The presence of a technician is mandatory to set back the lift in
user mode.
This detection only occurs in user mode
Caution : this detection can’t operate properly with a lift compliant to EN81-20 standard
, as in that case the landing doors are always unlocked when the lift is idle in user
mode.
To Next Page
Loading...
