Sprinte ASP 116 evolution - Page 44

USER MANUAL « ASP 116 EVOLUTION »
CONFIGURATION
Sprinte SAS, All rights reserved, including translation rights
44
ARRIVAL GONG
Gong signal of arrival of car at landings
Gong outputs are controlled on the 217SP expansion board by the output “GONG
ARRIV NIVXX” where XX is the arrival level
[NO GONG ] [STOPPED ] [SLOWING]
CONFIGURATION ► INDICATION ► ON FLOORS ► CONFIG.FLOOR ► ON FLOOR 00 … 31
This menu is available only if there are landing boards with your equipment AND no flexyPage are used on floors
For each floor :
LANDING DISPLAY
Display type
[NO DISPLAY] [61SP/63SP] [122SP/123SP] [ LCD WECO]
[232SP COLOR] [235SP BLUE] [236SP COLOR]
FLOOR/DISPLAY
Choice of indication to display at this floor.
Display possibilities depend on the display type
See appendix for available display depending on the display present in the
equipment
BACKGROUND PIC
Select background display for 236SP
(only with 236SP)
[FILE 001.BMP]… [FILE 028.BMP]
Choose a specific image file for the background .
ORIENTATION
Select the 232SP display orientation for this floor
(only with 23SP)
[LANDSCAPE] [VERTICAL]