Sprinte ASP 116 evolution - Page 59

MANUEL D’UTILISATION « ASP 116 EVOLUTION »
MAINTENANCE
Sprinte SAS, All rights reserved, including translation rights
59
and A3 Brake Control
configured)
 the maintained out of order mode of the lift (fault erasement in the diagnosis
menu needed).
[NO] [YES]
See installation manual for full description of this test.
SKIDDING TEST
Skidding fault detection test.
This test moves the car in slow speed, ignoring all information’s datas from the sahft
reader.
Once the « NO CAR MOVEMENT » timer (see §2.10.2) has elapsed, the
« SKIDDING » fault must have been detected and recorded.
[NO] [YES]
See installation manual for full description of this test.
LEVELLING TEST
Levelling functionality test
This test moves the car with the doors opened, then you can check the automatic
relevelling of the lift.
[NO] [YES]
See installation manual for full description of this test.
REPROG. BOARDS
Launch a software upgrade for a distant board
Use this function, if there is a « VERS. BOARD » in the controller’s fault list, in case
you have replaced a distant board (211SP or 230SP in car, or 228SP, 137SP on
floors), in order to upgrade the software according to the one of the controller.
POSITION DISPLAY
Displays absolute reader (K04SP/K05SP) information
- speed, altitude, precision stopping, direction of travel
[NO] [YES]
VISIT DONE
Updates the date of the last maintenance visit
Selecting “YES”, the date of the last maintenance visit is updated to the current date
of the controller. This date will be displayed on the 236SP color display in car if you
have selected the option (see §2.19.1).
[NO] [YES]
LAST VISIT
Displays the date of the last maintenance visit