MANUEL D’UTILISATION « ASP 116 EVOLUTION »
Sprinte SAS, All rights reserved, including translation rights
During door closing, the shunt has not been detected after several attempts.
- Check cabling and correct operation of SHUNT
- Check the door closing time covers the actual time for door closing
- Check if CLS does not appear too soon before the SHUNT or if it is not simply disconnected
The doors are not locked after several attempts
- Check correct operation of locking
Breaking LOCKING while moving
- Check that the locks’ wheels are not hooked by the cam or the door clip during movement
To Next Page
Loading...
