DO NOT touch the cutter with a magnet. It is safe, however, to cut thin magnetic sheets, such as those
used on refrigerators and car exteriors.
DO NOT allow any liquids to spill into the cutter.
DO NOT allow small items to fall into the cutter.
Place the SOLO on a sturdy and stable table, desk, or trolley.
• Always turn off the SOLO when not in use. Leaving the cutter turned on for extended periods of time can
possibly damage the machine.
• Always turn off the SOLO before unplugging the power adaptor or removing the power cable from the wall
outlet or power strip.
• Unplug the SOLO from a wall outlet or power strip during an electrical storm or when the cutter will not be
used for an extended period of time.
• Transporting: When transporting the cutter, move the pinch wheel lever into the upward position. Remove
the blade from the blade holder and cover the tip with the colored cap.
1.03 Warranty
• IMPORTANT! If your SOLO is damaged during shipment or appears to be defective, your reseller should be
notified as soon as possible.
• StarCraft warrants the StarCraft branded hardware product contained in the original packaging against
defects in materials and workmanship on all registered machines for two years. This warranty does not
include accessories, mats, and blades. Contact your reseller for warranty issues.
• It is recommended that you retain the original box with packing materials in case you ever need to ship your
SOLO.
1.04 SOLO Package Contents
•
Besides the SOLO, your box should also contain the following items:
To Next Page
Loading...