Contents v
TTYA Serial Port 72
USB Ports 73
Alarm Port 74
Managing Cables With the CMA 75
▼ To Open and Close a Cable Clip 75
▼ To Move a Cable Clip 76
Powering On the Server for the First Time 77
▼ To Power On the Server for the First Time 78
Enabling the System Controller Network Management Port 80
Logging Into the System Controller 80
▼ To Log Into the System Controller Using the Serial Management Port 80
▼ To Configure the System Controller Network Management Port 81
▼ To Reset the System Controller 84
▼ To Log Into the System Controller Using the Network Management Port
85
Using the System Controller for Common Operations 86
▼ To Power On the Server 86
▼ To Connect to the System Console 87
▼ To Perform a Normal Server Initialization 87
Booting the Solaris Operating System 89
▼ To Boot the Solaris Operating System 89
▼ To Reset the Server 90
▼ To Power Cycle the Server 90
To Next Page
